Đăng nhập
Liên hệ
Share :
Description
MODEL : ZEDSWEEP BM
This Machine is used for sanding after dipping. Designed with two pairs of Abrasive Brushes with different grits, for creating coarse sanding through first pair of brushes, and fine-sanding through second pair of brushes. This is featured with both side sanding in one pass.
The Brushing Machine is fully capable to deliver the ultimate result for after dipping Ply sanding without any colour fading.
MODEL : ZEDSWEEP TBM
Triple Head Brush Sanding Machine is designed for sanding through brushes for the application of normal / moderate sanding result as brushes can provide just an abrasion sufficient for removal of glue impression but not as good as compared to sanding belt results. This model is best for low / medium cost plywood segment.
Working Thickness 4-100 mm
Working Width 200-1250 mm
No. of Heads Four
Top & Bottom - Head 1 Brushing with Brush Roller - 5 HP (3.7 KW) x 2 no.
Top & Bottom - Head 2 Brushing with Brush Roller - 5 HP (3.7 KW) x 2
This Machine is used for sanding after dipping. Designed with two pairs of Abrasive Brushes with different grits, for creating coarse sanding through first pair of brushes, and fine-sanding through second pair of brushes. This is featured with both side sanding in one pass.
The Brushing Machine is fully capable to deliver the ultimate result for after dipping Ply sanding without any colour fading.
MODEL : ZEDSWEEP TBM
Triple Head Brush Sanding Machine is designed for sanding through brushes for the application of normal / moderate sanding result as brushes can provide just an abrasion sufficient for removal of glue impression but not as good as compared to sanding belt results. This model is best for low / medium cost plywood segment.
Working Thickness 4-100 mm
Working Width 200-1250 mm
No. of Heads Four
Top & Bottom - Head 1 Brushing with Brush Roller - 5 HP (3.7 KW) x 2 no.
Top & Bottom - Head 2 Brushing with Brush Roller - 5 HP (3.7 KW) x 2
Related Products
Core Composing Machine
Profile Sanding Machine for Door and Furniture
Automatic Edge Cutting Machine( With Motion Controller)
Sanding Machines With Cross Belt for Furniture's
Heavy Duty Both Side Calibrating Machine
Solid Wood Calibrating and Sanding Machine
Single Head Calibrating Machine
Heavy Duty Both Side Sanding Machine
Double Head Wide Belt Sanding Machine
You may also like
Veneer Sander
OPERA 5
Sanding machine
Sanding machine
CALIBRATING AND SANDING MACHINES
HPL GRINDING MACHINE
Table Fixed sander
DMC
Calibrating sander
Planer sander
CROSS-BELT SANDING MACHINE
HEESEMANN SANDER
Felder Wide Belt Sander
Lacquered Sander
Bottom sander
Highest Rated Products
OPERA 5
Hardwood Lumber
Cherry
Red Oak
Ash
White Oak
Walnut
Hard Maple
8391 U
9058 FA
2602 SC
5100 T/G
8290 J
6700 T/G/M
5560 U
6150 T/G/M
9075 FA
6270 T/G/M
American Hardwood Lumber
Table Fixed sander
Lacquered Sander
Bottom sander
Veneer Sander
Planer sander
Polishing brush sander
Calibrating sander
Tropical Hardwood
American Hardwood
European Hardwood
Sơn gỗ Teak Oil
Back
Product Inquiry